YOUR SPECIALIST FOR
INSTRUMENTATION
& CONTROL
  Home > Product > Water Analysis > HACH > CA610™







HACH COMPANY was established in 1947, in Ames, Iowa, USA. For more than 60 years, Hach has been the world market leader for Analytical Instrumentation for Complete Water Analysis, providing solutions for lab, process and field.


In 2002, GLI, a leading US manufacturer of process electro-chemistry analytical instruments, became part of the Hach Company family.

Water analysis has to be right. Our customers deserve complete, reliable solutions that they can be fully  confident in. Hach is your answer. We make water analysis simpler















Fluoride Analyzer

CA610™


Fluoride Analyzer



Details

Ion-selective electrode with patented, replaceable tip. Automatic calibration. Temperature-controlled wall-jet flow cell. Rugged, lightweight enclosure. Ultra-low reagent consumption. Virtually immune to interferences.

  • Reliable, Full-time Fluoride Monitoring
  • Patented Electrode Design with Replaceable Tip
  • Cost Effective Operation
  • Method of Analysis
  • Automatic Calibration

Specifications

Accuracy:± 10 % or ±0.10 mg/L whichever is greater
Air Purge:0.1 cfm at 20 psig max. instrument quality air, 1/4-inch OD tubing,
quick-disconnect fitting,
Calibration Method:5.0 mg/L fluoride standards
Compliance Certifications:CE approved, ETL listed to UL 1262, ETL certified to CSA 22.2 No. 142
Cycle Time:4.2 min
Dimensions Metric (H x W X D):34.3 mm x 41.9 mm x 19.1 mm
Display:LCD, 3 to 1/2 -digit measurement readout and six-character alphanumeric scrolling
text line
Drain Fitting:1/2-inch ID flexible hose
Inlet:1/4-inch OD polyethylene tubing, quick-disconnect fitting
Inlet Pressure:1 to 10 psig (use sample restriction device
to reduce higher pressure samples)
Lower Limit of Detection (LOD):0.10 mg/L 0.10 ppm
Mounting:Wall mount
Operating Humidity:90 % at 40 °C (90% at 104°F) max.
Operating Temperature Range:5 to 40 °C
Power Requirements (Amps):2.5 A
Power Requirements (Hz):50/60 Hz
Power Requirements (Voltage):100 - 115/230 V AC
Power supply:selectable, 90 VA max. ,
Range:0.1 to 10.0 mg/L Fluoride
Recorder Outputs:Una salida aislada del registrador, de 4 a 20 mA (puede ajustarse de 0 a 20 mA);
Sample Flow Rate:200 to 500 ml/minute, (200 mL/min minimum required)
Sample Temperature:5 to 40 °C
Storage Conditions:-40 to 60 °C (-40 to 140°F) without reagents

Parameters

 
Copyright © 2013-2018 IPSH Sdn Bhd. All rights reserved.